Images are representations only.

G-1561

Series: Model 10 Pneumatic Pressure Regulator Brand: Fairchild Industrial Products

FAIRCHILD Pressure Gage, 0-160 psi, 1-1/2" Diameter, 1/8" MNPT, CBM

Price
Request a Quote
Stock
6 - 8 weeks
Request Information
  • Pressure Gauge: 0-60 psi, 1-1/2" Diameter, 1/8" MNPT, CBM
  • Pressure Gauge: 0-60 psi, 1-1/2" Diameter, 1/8" MNPT, CBM
Close

Specifications

Brand

Actuator Type

  • Knob Adjust
  • Plunger Operated
  • Screwdriver Adjust
  • Tamper-Proof

Ambient Temperature Range

  • -40° to 93° C (-40° to 200° F)

BSP Connection

  • 1/2” BSPP Female
  • 1/2” BSPT Female
  • 1/4” BSPP Female
  • 1/4” BSPT Female
  • 3/8” BSPP Female
  • 3/8” BSPT Female

Elastomers

  • Buna-N on Dacron
  • Fluorocarbon (Viton)
  • Silicone

Enclosure, Body Material

  • Aluminum

Environmental Protection

  • Acceptable for Use in Zones 1 & 2 for Gas Atmosphere, Groups IIA & IIB & Zones 21 & 22 for Dust Atmospheres

Exhaust Capacity - Relieving Units Only

  • 5.5 scfm
  • 5.5 scfm (9.35 m³/hour)
  • 9.4 m³/hour

Flow Capacity

  • 40 scfm
  • 40 scfm (68 m³/hour) at psig: 100 (bar: 7, kPa: 700) Supply & psig: 20 (bar: 1.5, kPa: 150) Set Point
  • 68 m³/hour

Media

  • Compressed Air
  • Gas

Mounting

  • None
  • Panel Mount

NPT Connection

  • 1/2” NPT Female
  • 1/4” NPT Female
  • 3/8” NPT Female

Output Options

  • Check Valve
  • None

Pressure Range

  • bar: 0 to 1.36
  • bar: 0 to 28
  • bar: 0.034 to 2.04
  • bar: 0.068 to 4.08
  • bar: 0.136 to 10.20
  • bar: 0.204 to 13.60
  • bar: 0.34 to 27.20
  • kPa: 0 to 137
  • kPa: 0 to 2,800
  • kPa: 13.6 to 1,020
  • kPa: 20.4 to 1,360
  • kPa: 3.4 to 204
  • kPa: 34 to 2,720
  • kPa: 6.8 to 408
  • psi: 0.5 to 30
  • psig: 0 to 20
  • psig: 0 to 400
  • psig: 1 to 60
  • psig: 2 to 150
  • psig: 3 to 200
  • psig: 5 to 400

Relief

  • Low Bleed
  • Low Flow
  • Non-Relieving
  • Relieving

Sensitivity

  • 1/8” WC (0.32 cm)

Supply Pressure - Maximum

  • bar: 35
  • kPa: 3,500
  • psig: 500

Supply Pressure Effect

  • < 0.007 bar
  • < psi: 0.01 (bar: 0.0007, kPa: 0.7)
  • < psig: 0.1 (bar: 0.007, kPa: 0.7)
  • psig: 0.1 (bar: 0.007, kPa: 0.7) for a psig: 100 (bar: 7, kPa: 700) Change in Supply Pressure

Trim Material

  • Brass
  • Zinc-Plated Steel

Vent

  • Straight
  • Tapped Exhaust
Close
View Product Series

Similar SKUs

111.12-1.5-1C-60PSI
111.12-1.5-1C-60PSI
Bourdon Tube Pressure Gauge Type 111.12
Wika
Request a Quote
Out of Stock
WIKA 111.12 Gage, 1.5-inch Dial, 1/8 -inch CBM, 0-60 psi/kPa
111.12-2-2C-160PSI
111.12-2-2C-160PSI
Bourdon Tube Pressure Gauge Type 111.12
Wika
Request a Quote
Out of Stock
WIKA 111.12 Gage, 2-inch Dial, 1/4-inch CBM, 0-160 psi/kPa
111.12-2-2C-60PSI
111.12-2-2C-60PSI
Bourdon Tube Pressure Gauge Type 111.12
Wika
Request a Quote
Out of Stock
WIKA 111.12 Gage, 2-inch Dial, 1/4-inch CBM, 0-60 psi/kPa
111.12-1.5-1C-060
111.12-1.5-1C-060
Bourdon Tube Pressure Gauge Type 111.12
Wika
Request a Quote
Out of Stock
WIKA 111.12 Gage, 1.5-inch Dial, 1/8 -inch CBM, 0-60 psi
111.12-1.5-1C-12
111.12-1.5-1C-12
Bourdon Tube Pressure Gauge Type 111.12
Wika
Request a Quote
Out of Stock
WIKA 111.12 Gage, 1.5-inch Dial, 1/8 -inch CBM, 0-60 psi
PT-400-L1-600-PSI-G-E18-P53-M2-S1
PT-400-L1-600-PSI-G-E18-P53-M2-S1
PT-400 Pressure Transducer
Automation Products Group
$889.39USD
Out of Stock
APG PT-400 Pressure Sensor, 0-600 psi, Gauge, 1/2"MNPT 6", 1-1/2" MNPT FM, +/-0.5%, 17-4SST,HighTemp
111.12-1.51C20
111.12-1.51C20
Bourdon Tube Pressure Gauge Type 111.12
Wika
Request a Quote
Out of Stock
WIKA 111.12 Gage, 1.5-inch Dial, 1/8-inch CBM, 0-100#
PT-400-L1-160-PSI-G-E6-P0-N0-M1-S10
PT-400-L1-160-PSI-G-E6-P0-N0-M1-S10
PT-400 Pressure Transducer
Automation Products Group
$614.06USD
Out of Stock
APG PT-400 Pressure Sensor, 0-160 psi, Gauge, 4-Pin DIN, 1/4" MNPT, ± 0 .25%, 316L SST