Features:

  • Accepts input from accelerometers (single and dual output), piezo- velocity sensors
  • Input signal is split into two independent processing bands
  • Measures real time sensor bands, BOV, signal true peak and temperature (if available)
  • Built-in web browser allows custom configuration of bandwidth and detection type
  • 2 x 4-20 mA outputs, user-defined
  • High/low alarms mappable to a single NC/NO relay
  • Text field for user entry of machine information
  • Configurations can be stored for easy recall
  • Selectable speed range to monitor high- or low- speed machinery
  • Communicates using Modbus-TCP or RS485 protocol
read more...

Agency Approvals

  • CE

Operating Temperature

  • -40° to 70° C (-40° to 158° F)

Storage Temperature

  • -40° to 85° C (-40° to 185° F)

Temperature Effect

  • 10 mV/° C, 2 to 120° C, Sensor Dependent

Sensitivity

  • Sensitivity Range (Acceleration): 9 to 11,000 mV/g
  • Sensitivity Range (Temperature): 10 mV/° C (Optional 10 mV/° K)
  • Sensitivity Range (Velocity): 9 to 11,000 mV/in/sec

Range

  • Dynamic Range: >90 dB

Switch Type

  • DIP Switches

Input Signal

  • Maximum Dynamic Signal: ±10 Vac

Communication

  • Modbus/TCP
  • RS-485
  • RS485 - Maximum Baud Rate: 256 kbps
  • RS485: 120 Ohms Termination Network
  • RS485: 2-wire Half Duplex

Loop Resistance

  • Maximum Loop Resistance: 500 Ohms

Frequency

  • Frequency Response: 0.2 Hz to 20 kHz (-3 dB, 0.1 dB)
  • Maximum 200 to 20,000 Hz in 1, 2, 5 Sequence
  • True Peak Band: True Peak Detector, 10 Hz to 25 kHz

Electrical Connectors

  • BNC Connector
  • Screw Terminal
  • Terminal Block

Output

  • Loop Output: 4-20 mA (Two) Configurable from Measurement Results

Isolation

  • 500 Vac, Input to Output

Power

  • 11-32 Vdc
  • 350 mA Maximum
  • IEPE Power Source: 24 Vdc, 3.5 mA, Enable/Disable

Indication

  • Green LED: Solid (Normal), Flashing (Test), OFF (No Power)
  • Yellow LED: ON (Relay Energized), OFF (Relay De-Energized, RS485 Idle/Non-Matching Address), Flashing (RS485 Active)

Mounting

  • 35 mm DIN Rail

Sensor/Probe Type

  • Sensor Type: IEPE Accelerometers (Single and Dual Output) Piezo Velocity Transducers