Images are representations only.

Manifold Kit for Model T6000, T7800, T7950, T8000 Transducer

Brand: Fairchild Industrial Products
T6000, T7800 and T7950 Transducers: Current to Pneumatic (I/P or E/P)

The Rotork Fairchild Manifold Kits for the T6000, T7800 and T7950 Series Transducers are available for mounting 3, 5, 10 or 15 transducer units.

These manifolds have a common supply port to all the transducers. Internal check valves in the inlet and outlet ports permit the installation and removal of individual transducers without affecting other units on the manifold.

Supply port connections are provided on the end and rear of the manifold. Outlet ports are located on the rear and bottom of the manifold.

Mounting brackets for flush or extended mounting from the back wall are available. These options allow the user to select the combination of supply ports, outlet ports and mounting configurations to maximize usage of available space.

T8000 Series Transducer: Pneumatic to Current (P/I)

Manifold kits for the T8000 Series Transducers are also available for mounting 3, 5, 10 or 15 transducer units.
All input ports on the manifold have internal check valves to seal off the input signal if a transducer is removed from the manifold.

Since each housing may contain two individual P/I transducers, the quantity of P/I's on the manifold has the capability of doubling.

Rear and bottom input port connections and flush or extended mounting brackets allow the user to configure the manifold to maximize the use of available space.
show more
T6000, T7800 and T7950 Transducers: Current to Pneumatic (I/P or E/P)

The Rotork Fairchild Manifold Kits for the T6000, T7800 and T7950 Series Transducers are available for mounting 3, 5, 10 or 15 transducer units.

These manifolds have a common supply port to all the transducers. Internal check valves in the inlet and outlet ports permit the installation and removal of individual transducers without affecting other units on the manifold.

Supply port connections are provided on the end and rear of the manifold. Outlet ports are located on the rear and bottom of the manifold.

Mounting brackets for flush or extended mounting from the back wall are available. These options allow the user to select the combination of supply ports, outlet ports and mounting configurations to maximize usage of available space.

T8000 Series Transducer: Pneumatic to Current (P/I)

Manifold kits for the T8000 Series Transducers are also available for mounting 3, 5, 10 or 15 transducer units.
All input ports on the manifold have internal check valves to seal off the input signal if a transducer is removed from the manifold.

Since each housing may contain two individual P/I transducers, the quantity of P/I's on the manifold has the capability of doubling.

Rear and bottom input port connections and flush or extended mounting brackets allow the user to configure the manifold to maximize the use of available space.

Specifications

Check Valve

  • Brass Inlet & Outlet Ports

Elastomers

  • Buna-N

Materials of Construction

  • Manifold & Brackets: Aluminum

Mounting

  • Extended Wall Mount
  • Flush Wall Mount

NPT Connection

  • 1/8” NPT Female
  • 3/4” NPT Female
  • 3/8” NPT Female

Screw Material

  • Zinc-Plated Steel