Images are representations only.

PI73-TS Pressure Intensifier

Brand: Bifold - by Rotork
Request Information
The PI73-TS Intensifier amplifies the inlet pressure to a higher outlet pressure by a predetermined ratio.

Pressure in the high pressure line can become reduced as a result of a system leak or the use of the stored (pressure) energy.

The PI73-TS restores and maintains that pressure in such instances.

Check and changeover valves are integrated within the main body of the intensifier as is the pilot-operated vent valve in the versions in which it is incorporated.
Features
  • Designed to boost the pressure of any water-based or mineral/synthetic oil-based fluid
  • Boosts inlet pressure up to 7 times without external power. The maximum outlet pressure is psi: 20,020 (kPa: 138,000, bar: 1,380)
  • When system pressure is achieved, there is minimal consumption of expensive hydraulic fluid
  • External components manufactured from 316 (standard), or from duplex stainless steels; no painting required for hostile environments
  • Two versions - with and without a pilot-operated vent valve for the high pressure line
show more
The PI73-TS Intensifier amplifies the inlet pressure to a higher outlet pressure by a predetermined ratio.

Pressure in the high pressure line can become reduced as a result of a system leak or the use of the stored (pressure) energy.

The PI73-TS restores and maintains that pressure in such instances.

Check and changeover valves are integrated within the main body of the intensifier as is the pilot-operated vent valve in the versions in which it is incorporated.
Features
  • Designed to boost the pressure of any water-based or mineral/synthetic oil-based fluid
  • Boosts inlet pressure up to 7 times without external power. The maximum outlet pressure is psi: 20,020 (kPa: 138,000, bar: 1,380)
  • When system pressure is achieved, there is minimal consumption of expensive hydraulic fluid
  • External components manufactured from 316 (standard), or from duplex stainless steels; no painting required for hostile environments
  • Two versions - with and without a pilot-operated vent valve for the high pressure line
Close

Specifications

Brand

BSP Connection

  • 1/4” BSP Female

Cone & Thread Connection

  • 3/8” Female Medium Pressure

Enclosure, Body Material

  • Stainless Steel

NPT Connection

  • 1/4” NPT Female

Pressure Range

  • bar: 0 to 1,380
  • kPa: 0 to 138,000
  • psi: 0 to 20,020

Seat / Seal Material

  • Nitrile
  • Viton

Supply Pressure - Maximum

  • bar: 420
  • kPa: 42,000
  • psi: 6,092

Vent

  • Pilot Operated Vent
Close