• Process Fluid: Liquid, gas or steam
  • Output and Communication Protocol: Digital Only. Complies with IEC 61158-2:2000 (H1): 31.25 kbit/s voltage mode, bus powered
  • Power Supply:
    • Bus powered: 9 to 32 Vdc
    • Quiescent current consumption: 12 mA
  • Indicator: 4-1/2 digit numerical and 5-Character alphanumerical LCD indicator
  • Hazardous Area Certifications: Intrinsic Safe, non-incendive, exlposion proof, and dust ignition proof (FM, CSA, Nemko, EXAM, Cepel, and NEPSI)
  • Temperature Limits:
    • Ambient: -40°C to +85°C (-40°F to +185°F)
    • Process: -40°C to +100°C (-40°F to +212°F)
    • Storage: -40°C to +100°C (-40°F to +212°F)
    • Display: -20°C to +80°C (-4°F to +176°F)
    • Display: -40°C to +85°C (-40°F to +185°F), without damages
  • Turn-on Time: less than 5 seconds
  • Damping Adjustment: Any value between 0 to 32 seconds plus intrinsic sensor response time
  • Humidity Limits: 0 to 100% RH
  • Accuracy: ± 0.075% of span
  • Stability: ± 0.15% of URL per 5 years
  • Pressure Range bar: 12.5 mbar to 250 bar
  • Pressure Range psi:  5.02 inH2O to 3625.94
  • Power Supply Effect: ±0.005% of calibrated span per volt
  • Mounting Position Effect: Zero shift of up to 250 Pa (1 in H2O) which can be calibrated out.
  • Wetted Parts: 316L Stainless Steel, Hastelloy C-276
  • Non Wetted Parts:
    • Electronic Housing, Injected aluminum with polyester painting or 316 Stainless Steel. According to NEMA Type 4X or Type 4, IP66, IP66W
    • Silicone Oil Fill Fluid
    • Buna-N O-Ring
    • Plated Carbon or 316 Stainless Steel Mounting Bracket
read more...
LD292-M41I-11-00-I3
LD292-M41I-11-00-I3
$895.00 While Supplies Last
LD292-M51I-11-00-I3
LD292-M51I-11-00-I3
$911.00 While Supplies Last

Agency Approvals

  • 3-A Sanitary
  • CEPEL
  • CSA
  • EXAM
  • FM
  • ITK 4.6.1
  • NEMKO ATEX
  • NEPSI

Environmental Protection

  • Dust Ignition-Proof
  • Explosion-Proof
  • Intrinsically Safe
  • NEMA 4X, 6P / IP66, 68
  • Non-Incendive

Damping Adjustment

  • User Configurable from 0 to 32 Seconds (via Digital Communication).

Overpressure and Static Pressure Limits

  • psi: 2,000 (bar: 137.9, MPa: 14) for Ranges 2, 3, and 4
  • psi: 4,500 (bar: 310.3, MPa: 31) for Range 5

Operating Temperature - Display

  • -20° to 80° C (-4° to 176° F)
  • -40° to 85° C (-40° to 185° F); without damage

Storage Temperature

  • -40° to 100° C (-40° to 212° F)

Temperature Effect

  • ±[0.02% URL +0.06% of Span], per 20° C (68° F) for Span >=0.2 URL | ±[0.023% URL +0.045% of Span], per 20° C (68° F) for Span <0.2 URL

Ambient Temperature

  • -40° to 85° C (-40° to 185° F)

Humidity

  • 0 to 100% Relative Humidity

Process Temperature

  • -40° to 100° C (-40° to 212° F)

Accuracy

  • For Ranges 2, 3, 4, or 5: ±0.075% of Span (for Span >=0.1 URL) ±[0.0375 + 0.00375 URL/SPAN % of Span (for Span < 0.1 URL)

Stability

  • ±0.15% of URL for 5 years

Volumetric Displacement

  • >0.15 cm³ (0.01 in³)

Electromagnetic Interference Effect

  • Approved according to IEC61326-1:2006, IEC61326-2-3:2006, IEC61000-6-4:2006, IEC61000-6-2:2005

Media

  • Gas
  • Liquids and Gases
  • Steam

Power Supply Effect

  • ±0.005% of Calibrated Span Per Volt

Input Power

  • Bus powered: 9 to 32 Vdc. Current consumption quiescent 12 mA.
  • Output Impedance: Intrinsic Safety (assuming an IS barrier in the power Supply) from 7.8 kHz to 39 kHz should be greater or equal to 400 Ohms.
  • Output Impedance: Non-intrinsic Safety from 7.8 kHz to 39 kHz should be greater or equal to 3,000 Ohms.

Electrical Connectors

  • 1/2" NPT

Output

  • 4-20 mA
  • Foundation Fieldbus: Digital Only. Complies with IEC 61158-2:2000 (H1): 31.25 kbit/s voltage mode, bus powered.

Turn-On Time

  • Foundation fieldbus: approximately 10 Seconds

Display

  • 4-1/2-Digit Numerical and 5-Character Alphanumerical LCD Indicator

Configuration

  • Foundation Fieldbus: Basic configuration may be done using local Adjustment magnetic tool if device is fitted with display. Complete configuration is possible using remote, SYSCON (LD292), Smar ProfibusView & Simatic PDM.

Mounting

  • Carbon Steel Bracket and Accessories

Mounting Position Effect

  • Zero Shift of up to 250 Pa (1" H2O) which can be calibrated out. No Span effect.

Enclosure/Body Material

  • Injected Aluminum

Enclosure Finish

  • Polyester (Gray Munsell N 6.5) Paint

O-Ring Material

  • Buna-N

Diaphragm Material

  • 316 Stainless Steel

Fill Material

  • Silicone Oil