Wilcoxon’s top-exit 100 mV/g sensor is designed for monitoring areas with limited space. The general purpose accelerometer is ideal for monitoring machine vibration on a wide range of rotating equipment such as motors, pumps, fans, compressors, turbines and generators. A 316L stainless steel casing provides rugged durability for most extreme environments. The sensing element is housed in a case-isolated Faraday shield, providing maximum protection against ground loops and RF interference.
Features:
- Lightweight for walkaround programs
- Prevents ground loops in permanent mount applications with proper cabling
- Can be submersed with proper connector
- Hermetically sealed
- ESD protected
- Reverse wiring protection
- Manufactured in an approved ISO 9001 facility
Agency Approvals
- CE
Tests & Certificates
- ISO 9001
Temperature Range
- -50° to 120° C (-58° to 248° F)
Sensitivity
- Base Strain Sensitivity, Maximum: 0.0002 g/μstrain
- Electromagnetic Sensitivity, Equivalent g, Maximum: 70 µg/gauss
- Sensitivity, ±5%, 25° C (77° F): 100 mV/g
- Transverse Sensitivity: Maximum 5% of Axial
Non Linearity
- Amplitude Nonlinearity: 1%
Vibration
- Vibration Limit: 500g Peak
Shock
- Shock Limit: 5,000g Peak
Range
- Acceleration Range: 80 g Peak
Power Requirement
- 18-30 Vdc
- Current Regulating Diode: 2-10 mA
Output Impedence
- Maximum 100 Ohms
Frequency
- Frequency Response (±10%): 1 to 9,000 Hz
- Frequency Response (±3 dB): 0.5 to 14,000 Hz
- Frequency Response (±5%): 3 to 5,000 Hz
- Resonance Frequency: 30 kHz
Electrical Connectors
- Cable (J10 / J9T2A)
Voltage
- Bias Output Voltage: 12 Vdc
Circuit Protection
- ESD Protection
- Reverse Wiring Protection
Mounting
- 1/4-28 UNF Tapped Hole
Enclosure/Body Material
- 316L Stainless Steel
Element
- Sensing Element Design: PZT, Shear
Seal Type
- Hermetic
Noise
- Electrical Noise, Equivalent g (Spectral: 10 Hz): 10 µg/√Hz
- Electrical Noise, Equivalent g (Broadband: 2.5 Hz to 25 kHz): 700 µg
- Electrical Noise, Equivalent g (Spectral: 100, 1,000 Hz): 5 µg/√Hz