Top exit, ultra low frequency seismic accelerometer, case isolated, 2-pin MIL-C-5015 connector, 10 V/g.

 

Features: 

  • Ultra high sensitivity
  • Ultra low-noise electronics for clear signals at sub micro-g levels
  • Low frequency capable
  • Low pass filtered to eliminate high frequencies
  • Reverse wiring protection
read more...

Agency Approvals

  • CE

Temperature Range

  • -10° to 65° C (14° to 150° F)

Sensitivity

  • Base Strain Sensitivity: 0.0001 g/μstrain
  • Electromagnetic Sensitivity at 60 Hz: 20 µg/Gauss
  • Sensitivity, ±10%, 25° C (77° F): 10 V/g
  • Transverse Sensitivity Maximum: 1% of Axial

Non Linearity

  • Amplitude Nonlinearity: 1%

Vibration

  • Vibration Limit: 10g Peak

Range

  • Acceleration Range: 0.5 g Peak

Power Requirement

  • 18-30 Vdc
  • Current Regulating Diode: 2-10 mA

Output Impedence

  • Maximum 100 Ohms

Frequency

  • Frequency Response (± 10%): 0.10 to 300 Hz
  • Frequency Response (±3 dB): 0.05 to 450 Hz
  • Resonance Frequency: 750 Hz

Electrical Connectors

  • Cable (J9 / J9T2A)
  • Mating Connector: R6 Type
  • Output Connector: 2-Pin, MIL-C-5015 Style

Voltage

  • Bias Output Voltage: 9 Vdc

Mounting

  • 3/8-16 Tapped Hole

Enclosure/Body Material

  • 316L Stainless Steel

Element

  • Sensing Element Design: PZT Ceramic / Flexure

Seal Type

  • Hermetic

Noise

  • Electrical Noise, Equivalent g (Broadband: 2.5 Hz to 25 kHz): 0.5 µg
  • Electrical Noise, Equivalent g (Spectral: 2 Hz): 0.03 µg/√Hz
  • Electrical Noise, Equivalent g (Spectral: 10 Hz): 0.01 µg/√Hz
  • Electrical Noise, Equivalent g (Spectral: 100 Hz): 0.004 µg/√Hz