• Fixed Set Point Range:
    • Increasing: 1.5 to 30 Inches H20, 3.7 to 75 mbar
    • Decreasing: 0.8 to 27 Inches H20, 1.99 to 67.2 mbar
  • Deadband: Approximately:
    • At Bottom of Range: 0.7 Inches H20, 1.7 mbar
    • At Top of Range: 3.0 Inches H20, 7.5 mbar
  • Maximum System Pressure: 10 psig, 68.95 kPa, 689 mbar
  • Proof Pressure: 15 psig, 103.42 kPa, 1034 mbar
  • Wetted Materials:
    • Pressure Port: 1/4"-18 FNPT Aluminum
    • Diaphragm: Polyimide
    • O-Ring: Buna N
  •  Relay: SPDT or DPDT
  • UL, CSA
    • Explosion Proof - Class 1, Div/Zone 1, Groups A, B, C and D
  • CE Mark, Dual Seal 
The above description encapsulates the entire product series. Specifications for individual configurations may vary depending on the selection chosen.
read more...

Selected Configuration

Model #:

675GE1 @ 14.5 IN H20 DECR

Price:
Request a Quote
Availability:
Ships 10 - 12 Weeks
Min. Qty:
1 Item

Configuration

reset configuration

Agency Approvals

Available agency approvals listed below, ATEX/GOST is a non standard option.
  • ATEX
  • CE
  • CRN - N.W. Territories
  • CSA
  • cUL
  • Dual Seal
  • EMC
  • LVD
  • PED
  • RoHS
  • RTN
  • UL

Environmental Protection

  • Hazardous Area
  • NEMA 4, 7, 9, 13 / IP54, 66

Set Point - Increasing

Fixed set point range - increasing below describes the range of the entire series.
  • bar: 0.004 to 0.74
  • Inches WC: -1.5 to 30
  • kPa: 0.38 to 7.46
  • mbar: 3.7 to 75
  • psig: 0.06 to 1.08

Set Point - Decreasing

Fixed set point range - decreasing below describes the range of the entire series.
  • bar: 0.002 to 0.06
  • Inches WC: -0.8 to 27
  • kPa: 1.0 to 6.7
  • mbar: 1.99 to 67.2
  • psig: 0.03 to 0.97

Adjustment Type

  • Factory Set (Pre-Set)
  • Field Adjustable

System Pressure

System Pressure below describes the range of the entire series.
  • kPa: 68.95
  • mbar: 689
  • psig: 10

Proof Pressure

Proof Pressure below describes the range of the entire series.
  • kPa: 103.42
  • mbar: 1034
  • psig: 15

Operating Temperature

  • -40° to 86° C (-40° to 187° F)

Deadband, Approximate - Bottom of Range

Deadband below describes the approximate - bottom of range, of the entire series
  • Inches WC: 0.7
  • mbar: 1.7

Deadband, Approximate - Top of Range

Deadband below describes the approximate - top of range, of the entire series
  • Inches WC: 3.0
  • mbar: 7.5

Process Connection - Threaded

  • 1/4" Female NPT

Switch Type

  • DPDT
  • SPDT

Electrical Assembly

  • Hermetic Seal

Electrical Rating

Electrical Characteristics:
VOLTS AMPERES
SPDT DPDT
Resistive Resistive
Silver Contacts
125 AC - 50/60 Hz 15 5
250 AC - 50/60 Hz 15 5
480 AC - 50/60 Hz 15 -
28  DC     - 5
125 DC     0.5 0.5
250 DC     0.2 -
Gold Contacts
125 AC - 50/60 Hz 1 Max 1 Max
30 DC     1 Max 1 Max
SPDT (Single Pole Double Throw)
A SPDT switching element has one normally open, one normally closed and one common terminal. Three terminals mean that the switch can be wired with the circuit either normally open (N/O) or normally closed (N/C).

DPDT (Double Pole Double Throw)
A DPDT switching element has six electrical terminals. In simple terms, it is two SPDT switching elements operating simultaneously at the same settings. This type of switch can handle two independent circuits without using a relay.

Normally Closed Switching Element
A Normally Closed (NC) Switching Element is one in which the terminals are wired so that current can flow through the switching element until the plunger pin is actuated to open the circuit.
  • 1 A at 125 Vac, 50/60 Hz
  • 15 A at 125/250/480 Vac Resistive 0.5 A at 125 DC, 0.2 A at 250 DC
  • 5 A at 125/250 Vac Resistive, 5 A at 28 DC, 0.5 A at 125 DC

Electrical - Free Leads

  • 18" (45 cm) Free Leads

Electrical Contacts

Available electrical contact materials listed below, silver is standard.
  • Gold
  • Silver

Electrical Connectors

  • 1/2" Male NPT

Electrical Certification

  • ATEX - Baseefa certified for potentially explosive atmospheres. Models 675**Y, II 2 GD Ex d IIC, Baseefa 08ATEX0347X. (Option Y)
  • c-UL, U.L./CSA Explosion Proof: Div. 1, 2 hermetically sealed electrical assembly P/N 17-51 (17-73 for M model option), listed by both Underwriter’s Laboratories, Inc. (File No. E32961) and Canadian Standard Association (CSA)Testing Laboratories (File No. LR22921) for hazardous locations, Class 1, Groups A, B, C, and D; Class 2 Groups E, F, and G.

Enclosure/Body Material

  • Aluminum

Process Connection Material

  • Aluminum

O-Ring Material

Available O-ring materials listed below, Buna-N is standard.
  • Buna-N
  • Viton

Diaphragm Material

  • Polyimide