Images are representations only.
Kayden High Temp A05-TFE Instrumentation Cable Assembly to connect Kayden Sensor Probe to Remote Electronics Plug in Base
Description
Cable Specification
- Instrument High Temp TFE Remote Cable Assembly for Kayden Sensor
Construction
- 6 Conductor 20AWG (7x28 Strands) Tinned Copper, FEP Insulation, Overall Beldfoil®+Tinned Copper Braid(85%) Shield, FEP Outer Jacket, CMP
Voltage Rating
- 300 Volts
Temperature Rating
- UL 150°C
Specifications
- CEC, cUL CMP, Indoor - Plenum, Indoor, Outdoor, Sunlight Resistance, Oil Resistance, NFPA 262, UL 910 (Plenum), FT6, Gas Resistant
Configure
Specifications
Specifications
Brand
Brand
- Kayden Instruments
Cable Make
- Beldon
- 6 Conductor x 20 AWG
- Beldfoil Shielded
Approvals & Certifications for Cable only
- CEC cUL Compliance - CMP
- NFPA 262, UL 910 (Plenum), FT6
Enviromental Suitability
- Indoor - Plenum, Indoor, Outdoor, Sunlight Resistance, Oil Resistance
Sustainabbility
- CA Prop 65
Outer Jacket
- FEP - Fluorinated Ethylene Propylene
- Nom. Diameter - 0.209 in (5.31 mm)
Shield Material
- Tape - Bi-Laminate (Alum+Poly) 100%
Conductors
- Qty 6
- 20 AWG
- Stranded 7x28
- TC Tinned Copper
Electrical Wire Spec
- 11.1 Ohm/1000 ft
- Capcitance - 26 pF/ft (85 pF/m)
- Max Current 2.7 Amps per Conductor at 25ºC
Voltage
- Max 300 V (CMP)
Temperature
- UL - 150°C
- -70°C to +200° Operating
Connection
- Molex 8 Pin Female Plug Connector x Free Leads cw Barrel Lugs
