Images are representations only.

FAIRCHILD T9000 I/P Transducer, 4-20 mA, 0-150 psi, 1/2", Feedback, Electrical Connector on RH Side

Price
Request a Quote
Stock
4 In Stock
Description
  • T9000 I/P Transducer
    • Electrical Connector on Right Hand Side (Custom)
    • 4-20 mA Signal Input
    • 0-150 psig Output Pressure
    • 1/2" FNPT Process Connection
    • 4-20mA Analog Output Option
    • Power Failure Mode (Fail Freeze Set-point)
    • Tapped Exhaust
  • T9000 I/P Transducer
    • Electrical Connector on Right Hand Side (Custom)
    • 4-20 mA Signal Input
    • 0-150 psig Output Pressure
    • 1/2" FNPT Process Connection
    • 4-20mA Analog Output Option
    • Power Failure Mode (Fail Freeze Set-point)
    • Tapped Exhaust

Specifications

Accuracy

  • < 0.50 % Output Span

Air Consumption

  • 0 at Steady State Output with Deadband at 1 % of Full Scale

Approvals & Certifications

  • EMC 89/336/EEC, EMC Directive

BSP Connection

  • 1” BSPP Female
  • 1” BSPT Female
  • 1/2” BSPP Female
  • 1/2” BSPT Female
  • 1/4” BSPP Female
  • 1/4” BSPT Female
  • 3/4” BSPP Female
  • 3/4” BSPT Female
  • 3/8” BSPP Female
  • 3/8” BSPT Female

Deadband

  • Adjustable from 0 to 10 % of Full Scale

Elastomers

  • Fluorocarbon
  • Nitrile

Enclosure Finish

  • Epoxy Coated

Enclosure, Body Material

  • Chromate Treated Aluminum
  • Polymer

Exhaust Capacity - Relieving Units Only

  • 1 to 350 scfm where Downstream Pressure is psig: 60 (kPa: 400, bar: 4)

Exhaust Port

  • Tapped Exhaust Port

Flow Rate

  • 1 to 700 scfm at psig: 150 (kPa: 1,034, bar: 10) Supply

Frequency

  • -3 dB at 1 Hz Per ISA S26.4.3.1 Load Configuration A

Input

  • 0-10 Vdc / 400 ohms Min.
  • 4-20 mA / 500 ohms, Max.
  • DeviceNet

Input Power

  • Power Consumption: < 5 Watts

NPT Connection

  • 1” NPT Female
  • 1/2” NPT Female
  • 1/4” NPT Female
  • 3/4” NPT Female
  • 3/8” NPT Female

Output

  • Analog Output Signal / Impedence: 0-10 Vdc / 400 ohms Min.
  • Analog Output Signal / Impedence: 4-20 mA / 500 ohms, Max.

Pressure Range

  • bar: 0 to 10
  • kPa: 0 to 1,000
  • psig: 0 to 150

Pressure Type

  • Gauge

RFI/EMI Effect

  • < 0.5 % EMC Directive 89/336/EEC European Norms EN 50081-2 & EN 50082-2

Supply Pressure - Maximum

  • psig: 200 (kPa: 1,400, bar: 14)

Supply Voltage

  • 24 Vdc ± 10 %

Temperature Range

  • -18° to 71° C (0° to 160° F)

Trim Material

  • Zinc-Plated Steel

Vibration Effect

  • < 1 % of Span Under the Following Conditions: 5 to 15 Hz at 0.8” Constant Displacement 15 to 500 Hz at 10 G's