The SOLDO HW series combines a compact enclosure with limit switches, visual indication and integral solenoids for position indication plus valve actuator control.

The HW‘s wide variety of switches and solenoid options make it the ideal low cost solution for use in water proof applications. NAMUR and proximity switch options combines with Ex ia and Ex n solenoid valve also make the series suitable for use in intrinsically safe and non incendive applications.

Benefits and Features:

  • Weather Proof Enclosure
  • 3D Red and Green Visual Position Indicator
  • 2-1/2" NPT Cable Entries
  • 1-3/4" NPT Cable entry Profibus communication board
  • Two digital input for valve position detection
  • Two extra dry contact inputs available for customer needing
  • Two digital output for solenoid valve connection adjustable metal cams Integrated mounting legs for namur actuators
  • Integrated solenoid valve 5/2 way convertible in 3/2 way
The above description encapsulates the entire product series. Specifications for individual configurations may vary depending on the selection chosen.
read more...

Selected Configuration

Model #:

HW

Price:
Request a Quote
Availability:
Out of Stock
Min. Qty:
1 Item

Configuration

reset configuration

Agency Approvals

  • cULus: Non-Incendive, Class 1/2 Division 2
  • EAC
  • RTN
  • SIL 2 and SIL 3
  • UL: General purpose
  • ULUS

Environmental Protection

  • IP66
  • IP67
  • NEMA 4
  • NEMA 4X
  • Weatherproof

Temperature Range

  • -60° to 100° C (-76° to 212° F)

Ambient Temperature

  • -60° to 80° C (-76° to 176° F)

Switch Quantity

  • 2 Switches
  • 3 Switches
  • 4 Switches (on Exd IIB Certification)

Process Connection - Threaded

  • 1/4" Female BSP Pneumatical Connection
  • 1/4" Female NPT Pneumatical Connection

Length

  • 0.78" (20 mm) to 1.96" (50 mm) - Shaft Length

Media

  • Inert Gas Contact Chamber - REED C4 and C8

Sensor Connection

  • 2-wire
  • 3-wire

Actuator Type

  • Double Acting Actuator - For Drible Control System
  • Spring Return Actuator - For Drible Control System

Switch Type

  • DPDT - Proximity Hermetically Sealed Snap Acting, Reed
  • Hermetic seal proximity dry contact
  • Inductive Proximity
  • NAMUR
  • PNP, Normally Open
  • SPDT - Proximity Hermetically Sealed Snap Acting, Reed

Cable Entry

  • 1/2" NPT
  • 1-3/4" NPT
  • 2-1/2" NPT
  • 3/4" NPT
  • M20 x 1.5
  • M25 x 1.5

Electrical Rating

  • 0.1 A at 120 Vac - REED C4 and C8
  • 1 A at 24 Vdc - High Power Loop for REED C4 and C8
  • 1 A at 250 Vac - High Power Loop for NOVA V3™ N3
  • 1 A at 30 Vdc - High Power Loop for NOVA V3™ N3
  • 5 A at 250 Vac - High Power Loop for NOVA V3™ N1 and N4
  • 5 A at 28 Vdc - High Power Loop for NOVA V3™ N1 and N4

Communication

  • Profibus Communication Board

Electrical Contacts

  • Gold-Plated - SPDT
  • Normally Closed
  • Normally Open
  • Silver-Plated - SPDT, DPDT

Indication

  • Red and Green and 3D Stainless Steel Visual Position Indicator

Mounting

  • ISO Namur

Enclosure/Body Material

  • Die-cast Aluminum

Enclosure Finish

  • Black and Blue Powder Coated Polyester
  • Hard-Coat Anodized Aluminum - Pneumatic Manifold Including Threaded Areas

Shaft Material

  • Stainless Steel - Fasteners

Trim Material

  • Stainless Steel - Mounting Legs

Cover Material

  • Die Cast Aluminum

Solenoid Type

  • 5/3-way Double Coil Special Schematic and Closed Centers

Sensor/Probe Type

  • NAMUR Inductive Proximity Sensor

Coil Voltage

  • 110 Vac - Exn Certified Pilot Valve Coil Rating
  • 12 Vdc - Exia Certified Pilot Valve Coil Rating
  • 24 Vac - Exia Certified Pilot Valve Coil Rating
  • 24 Vdc - Exia and Exn Certified Pilot Valve Coil Rating