Images are representations only.

Model 786-500-IS Low-Frequency Intrinsically Safe Accelerometer

Brand: Wilcoxon Sensing Technologies
Wilcoxon’s intrinsically safe 786-500-IS sensor is certified for usage in hazardous areas and offers clear signals at low vibration levels. The sensor is designed with extended low-end frequency response and improved signal-to-noise ratio compared to other general-purpose models. It can be used to detect both low- and high-speed vibrations and is optimized for detecting vibration on slow turning machinery such as cooling tower fans and slow-speed gearboxes.

The 786-500-IS sensor is classifed for usage in Class I Division 1/Zone 0/1 locations where ignitable concentrations of flammable gases, vapors or liquids are present continuously under normal operating conditions.
Features
  • High sensitivity
  • Extended low frequency response
  • Clear signals at low vibration levels
  • Class I, Div 1/Zone 0/1 certified
  • Hermetically sealed
  • ESD protected
  • Reverse wiring protection
  • Manufactured in an approved ISO 9001 facility
show more
Wilcoxon’s intrinsically safe 786-500-IS sensor is certified for usage in hazardous areas and offers clear signals at low vibration levels. The sensor is designed with extended low-end frequency response and improved signal-to-noise ratio compared to other general-purpose models. It can be used to detect both low- and high-speed vibrations and is optimized for detecting vibration on slow turning machinery such as cooling tower fans and slow-speed gearboxes.

The 786-500-IS sensor is classifed for usage in Class I Division 1/Zone 0/1 locations where ignitable concentrations of flammable gases, vapors or liquids are present continuously under normal operating conditions.
Features
  • High sensitivity
  • Extended low frequency response
  • Clear signals at low vibration levels
  • Class I, Div 1/Zone 0/1 certified
  • Hermetically sealed
  • ESD protected
  • Reverse wiring protection
  • Manufactured in an approved ISO 9001 facility
4 models matching criteria
787AM8
WILCOXON Intrinsically Safe Accelerometer, 18-30 VDC, -55° to +120°C, 316L SST View More
  • Sensitivity, ±5%, 25°C: 100 mV/g
  • Frequency response:
    • ±10%: 1 - 5,000 Hz
    • ±3 dB: 0.7 - 10,000 Hz

  • Temperature Range: -55° to +120° C
    • Response:
      • –55°C: –20%
      • +120°C: +10%


  • Power Requirement:
    • Voltage Source: 18 - 30 VDC
    • Current regulating diode: 2 - 10 mA

  • Output Connector: 2 Pin, MIL-C-5015 Style
  • CSA Class I, Div 1 Groups A, B, C, D Class II, Div 1 Groups E, F, G Class III Class I Zone 0 AEx/Ex ia IIC T4 Ta = -50°C to 120°C
Out of Stock
$424.00USD
$14.84 Shipping
786A-IS
WILCOXON Intrinsically Safe Accelerometer, 18-28 VDC, -55° to +120°C, 316L SST View More
  • Sensitivity, ±5%, 25°C: 100 mV/g
  • Frequency response:
    • ±5%: 3 - 5,000 Hz
    • ±10%: 1 - 9,000 Hz
    • ±3 dB: 0.5 - 14,000 Hz

  • Temperature Range: -55° to +120° C
    • Response:
      • –55°C: –20%
      • +120°C: +10%


  • Power Requirement:
    • Voltage Source: 18 - 28 VDC
    • Current regulating diode: 2 - 10 mA

  • Output Connector: 2 Pin, MIL-C-5015 Style
  • CSA Class I, Div 1 Groups A, B, C, D Class II, Div 1 Groups E, F, G Class III Class I Zone 0 AEx/Ex ia IIC T4 Ta = -50°C to 120°C
1 - 3 weeks
$483.41USD
$14.84 Shipping
786-500-IS
WILCOXON Intrinsically Safe Accelerometer, 18-30 VDC, -50° to +120°C, 316L SST View More
  • Sensitivity, ±5%, 25°C: 500 mV/g
  • Frequency response:
    • ±5%: 0.7 - 5,000 Hz
    • ±10%: 0.5 - 9,000 Hz
    • ±3 dB: 0.2 - 14,000 Hz

  • Temperature Range: -50° to +120° C
    • Response:
      • –20°C: –10%
      • +120°C: +10%


  • Power Requirement:
    • Voltage Source: 18 - 28 VDC
    • Current regulating diode: 2 - 10 mA

  • Output Connector: 2 Pin, MIL-5015 Style
  • CSA Class I, Div 1 Groups A, B, C, D Class II, Div 1 Groups E, F, G Class III Class I Zone 0 AEx/Ex ia IIC T4 Ta = -50°C to 120°C
1 - 3 weeks
$490.09USD
$14.84 Shipping
IT301
WILCOXON User-configurable Intelligent Vibration Transmitter, MODBUS, 11-32 VDC, NC/NO View More
  • Sensitivity Range:

    • acceleration: 9 mV/g - 11,000 mV/g
    • velocity: 9 mV/in/sec - 11,000 mV/in/sec
    • temperature: 10 mV/°C (optional 10 mV/°K)

  • IEPE power source: +24 VDC, 4.5 mA, enable/disable
  • Alarms: High / Low / Relay
    • All measurement parameters, user-configurable

  • Loop Outputs
    • 4-20 mA (two): Configurable from measurement results
    • Sourced: Full scale, user-configurable

  • Alarm relay: 1 x NC/NO
  • Power: 11 - 32 VDC, 350 mA max
  • Temperature:
    • Operating: –40 to +70° C
    • Storage: –40 to +85° C

  • Certifications: CE
1 - 3 weeks
$1,281.66USD
$14.84 Shipping

Specifications

Approvals & Certifications

  • ATEX Ex ia IIC T4 Ga
  • CE
  • CSA (C,US) Class I, Division 1, Grade A, B, C, D Class I, Division 1, Groups E, F, G Class III, Division 1, Class I, Zone 0 AEx, Ex ia IIC T4
  • IECEx

Approvals & Certifications

  • ISO 9001

Circuit Protection

  • ESD Protection
  • Reverse Wiring Protection

Electrical Connectors

  • Cable (J10 / J9T2A, < 100 feet)
  • Mating Connector: R6 Typical

Element

  • Sensing Element Design: PZT, Shear

Enclosure, Body Material

  • 316L Stainless Steel

Frequency

  • Frequency Response (± 10 %): 0.5 to 9,000 Hz
  • Frequency Response (± 3 dB): 0.2 to 14,000 Hz
  • Frequency Response (± 5 %): 0.7 to 5,000 Hz
  • Resonance Frequency, Mounted, Nominal: 30 kHz

Mounting

  • 1/4-28 Captive Hex Head Screw, 0.046" Diameter Safety Wire Hole

Noise

  • Electrical Noise, Equivalent G, Nominal (Broadband: 2.5 Hz to 25 kHz): 250 µg
  • Electrical Noise, Equivalent G, Nominal (Spectral: 10 Hz): 2.5 µg/√Hz
  • Electrical Noise, Equivalent G, Nominal (Spectral: 100, 1,000 Hz): 1.5 µg/√Hz

Non-Linearity

  • Amplitude Non-Linearity: 1 %

Output Impedence

  • Maximum 100 Ω

Power Requirement

  • 18-30 Vdc
  • Current Regulating Diode: 2-10 mA

Range

  • Acceleration Range, Vdc > 22 V: 10 G Peak

Seal Type

  • Hermetic

Sensitivity

  • Base Strain Sensitivity, Maximum
  • Electromagnetic Sensitivity, Equivalent G, Maximum
  • Sensitivity, ± 5 %, 25° C (77° F): 500 mV/g
  • Transverse Sensitivity: Maximum 5 % of axial

Shock

  • Shock Limit: 5,000 G Peak

Temperature Range

  • -50° to 120° C (-58° to 248° F)

Vibration

  • Vibration Limit: 500 G Peak

Voltage

  • Bias Output Voltage, Nominal: 12 Vdc