• Adjustable Set Point Range (Vacuum):
    • Increasing: 1.5 to 18 Inches Hg, 38 to 457 mm Hg
    • Decreasing: 0.5 to 17 Inches Hg, 12.7 to 432 mm Hg
  • Deadband (Vacuum): Approximately
    • At top of range: 1.0 Inches Hg, 25 mm Hg
    • At bottom of range: 1.0 Inches Hg, 25 mm Hg
  • Adjustable Set Point Range (Gauge Pressure):
    • Increasing: 1.0 to 10 psi, 6.9 to 68.9 kPa, 0.068 to 0.68 bar
    • Decreasing: 0.5 to 9.5 psi, 3.4 to 65.5 kPa, 0.034 to 0.65 bar
  • Deadband (Gauge Pressure): Approximately
    • At top of range: 0.5 psi, 3.4 kPa, 0.034 bar
    • At bottom of range: 0.5 psi, 3.4 kPa, 0.034 bar
  • System Pressure (Maximum): 500 psig, 3447.38 kPa, 34.5 bar
  • Proof Pressure: 750 psig, 5171.07 kPa, 52 bar
  • Wetted Materials:
    • Pressure Port: 1/4" FNPT Aluminum
    • Diaphragm: Polyimide
    • O-Ring: Buna N
  • Relay: SPDT or DPDT
  •  UL, CSA
    • Explosion Proof - Class 1, Div/Zone 1, Groups A, B, C and D
  • CE Mark, Dual Seal
The above description encapsulates the entire product series. Specifications for individual configurations may vary depending on the selection chosen.
read more...
646GVE2
646GVE2
$393.00
  • Process Connection

    1/4"-18 Female NPT Aluminum
  • Diaphragm

    Polyimide
  • O-Ring

    Buna-N
  • Output

    SPDT
  • Electrical Contacts

    Silver
  • Agency Approvals

    UL, CSA, CE, Dual Seal

Selected Configuration

Model #:

646GVE2

Price:
$393.00 USD
Availability:
In Stock (2 left)
Min. Qty:
5 Items

Configuration

reset configuration

Agency Approvals

Available agency approvals listed below, ATEX/GOST is a non standard option.
  • ATEX
  • CE
  • CRN - Alberta
  • CRN - British Columbia
  • CRN - Manitoba
  • CRN - N.W. Territories
  • CRN - Saskatchewan
  • CSA
  • cUL
  • Dual Seal
  • EMC Directive
  • LVD
  • PED
  • RoHS
  • RTN
  • UL

NACE & NIST

  • NACE

Set Point - Increasing

Set Point Ranges below describe the adjustable increasing range of the entire series.
  • bar: -0.068 to 0.68
  • Inches Hg: -1.5 to 18
  • kPa: -6.9 to 68.9
  • mm Hg: -38 to 457
  • psig: -1.0 to 10

Set Point - Decreasing

Set Point Ranges below describe the adjustable decreasing range of the entire series.
  • bar: -0.034 to 0.65
  • Inches Hg: -0.5 to 17
  • kPa: -3.4 to 65.5
  • mm Hg: -12.7 to 432
  • psig: -0.5 to 9.5

Adjustment Type

  • Field Adjustable

System Pressure

System Pressure below describes the range of the entire series.
  • bar: 34.5
  • kPa: 3,447
  • psig: 500

Proof Pressure

Proof Pressure below describes the range of the entire series.
  • bar: 52
  • kPa: 5,171
  • psig: 750

Operating Temperature

  • -40° to 86° C (-40° to 187° F)

Deadband, Approximate - Bottom of Range

Set Point Ranges below describe the deadband, approximate - bottom of range of the entire series.
  • bar: 0.034
  • Inch Hg: 1.0
  • kPa: 3.4
  • mm Hg: 25
  • psi: 0.5

Deadband, Approximate - Top of Range

Set Point Ranges below describe the deadband, approximate - top of range of the entire series.
  • bar: 0.034
  • Inch Hg: 1.0
  • kPa: 3.4
  • mm Hg: 25
  • psi: 0.5

Process Connection - Threaded

  • 1/4" Female NPT

Environmental Protection

  • Hazardous Area
  • IP54
  • IP66
  • NEMA 13
  • NEMA 4, 7, 9, 13 / IP54, 66
  • NEMA 7
  • NEMA 9

Switch Type

  • DPDT
  • SPDT

Electrical Assembly

  • Hermetic Seal

Electrical Rating

Electrical Characteristics:
VOLTS AMPERES
SPDT DPDT "M" Dbl Brk"X"
Resistive Resistive Resistive
Silver Contacts
125 AC - 50/60 Hz 15 5 15
250 AC - 50/60 Hz 15 5 15
480 AC - 50/60 Hz 15 - 15
28 DC     - 5 -
125 DC     0.5 0.5 1
250 AC - 50/60 Hz 0.2 - 0.5
Gold Contacts
125 AC - 50/60 Hz  1 Max 1 Max -
30 DC     1 Max 1 Max -
SPDT (Single Pole Double Throw)
A SPDT switching element has one normally open, one normally closed and one common terminal. Three terminals mean that the switch can be wired with the circuit either normally open (N/O) or normally closed (N/C).

DPDT (Double Pole Double Throw)
A DPDT switching element has six electrical terminals. In simple terms, it is two SPDT switching elements operating simultaneously at the same settings. This type of switch can handle two independent circuits without using a relay.

Normally Closed Switching Element
A Normally Closed (NC) Switching Element is one in which the terminals are wired so that current can flow through the switching element until the plunger pin is actuated to open the circuit.
  • 1 A at 125 Vac, 50/60 Hz
  • 11 A at 125/250 Vac Resistive, 5 A at 28 Vdc, 0.5 A at 125 Vdc
  • 15 A at 125/250/480 Vac Resistive 0.5 A at 125 DC, 0.2 A at 250 DC

Electrical - Free Leads

Available selections listed below, free leads are standard.
  • 18" (45 cm) Free Leads
  • 18" (45 cm) Teflon Leadwire

Electrical Contacts

Available electrical contact materials listed below, silver is standard.
  • Gold
  • Silver

Electrical Connectors

  • 1/2" Male NPT

Electrical Certification

  • 24 Inch-pounds
  • c-UL, U.L./CSA Explosion Proof: Div. 1, 2 hermetically sealed electrical assembly P/N 17-51 (17-73 for M model option), listed by both Underwriter’s Laboratories, Inc. (File No. E32961) and Canadian Standard Association (CSA) Testing Laboratories (File No. LR22921) for hazardous locations, Class 1, Groups A, B, C, and D; Class 2 Groups E, F, and G.

Enclosure/Body Material

  • Aluminum

Process Connection Material

Available pressure port materials listed below, aluminum is standard.
  • 316 Stainless Steel
  • Aluminum

O-Ring Material

Available O-ring materials listed below, Buna-N is standard.
  • Buna-N
  • Ethylene Propylene
  • Viton

Diaphragm Material

Available diaphragm materials listed below, polyimide is standard.
  • Polyimide
  • Stainless Steel