Features:
  • Conforms to NACE MR0175
  • The no-brass construction is well suited to harsh environments
  • Epoxy coated finish for superior corrosion resistance
  • Non-bleed design to reduce consumption
  • Integral Relief Valve
  • A Gauge Port provides convenient pressure gauge mounting
  • The standard 5-micron filter minimizes internal contamination
  • The Filter Dripwell contains a drain plug to easily drain trapped liquids
  • Standard Tapped Exhaust
  • Soft Relief Seat minimizes air loss
  • Canadian Registration Number (CRN) certification for all territories and provinces
  • -51° C (-60° F) Low temperature Rating
The above description encapsulates the entire product series. Specifications for individual configurations may vary depending on the selection chosen.
read more...

Selected Configuration

Model #:

Model 63N

Price:
Request a Quote
Availability:
Out of Stock
Min. Qty:
1 Item

Configuration

reset configuration

Agency Approvals

  • CRN

NACE & NIST

  • NACE MR0175

Pressure Range

  • bar: 2.06 to 8.27
  • kPa: 207 to 827
  • psig: 30 to 120

Supply Pressure - Maximum

  • bar: 20
  • kPa: 2,000
  • psig: 300

Supply Pressure Effect

  • Less than psig: 1.25 (bar: 0.09, kPa: 9) change for psig: 100 (bar: 7, kPa: 700) change in supply pressure psig: 1.90 for 120 psig range

Temperature Range

  • -51° to 82° C (-60° to 180° F)

Sensitivity

  • 1" WC (2.54 cm)

Exhaust Capacity - Relieving Units Only

  • 0.8 SCFM (1.36 m³/Hour)

Process Connection - Threaded

  • 1/4" Female BSPP
  • 1/4" Female BSPT
  • 1/4" Female NPT

Relief

  • Relieving

Vent

  • Threaded

Actuator Type

  • Knob
  • Screw
  • Tamper-Proof

Gauge Connection

  • 2" NPT

Flow Capacity

  • 25 SCFM (42.5 m³/hr) at psig: 100 (kPa: 700, bar: 7) Supply, psig: 20 (kPa: 150, bar: 1.5) Set Point

Enclosure/Body Material

  • Epoxy Coated Aluminum

Trim Material

  • Stainless Steel

Elastomers

  • Nitrile