Images are representations only.

IV2 Block-and-bleed 2-valve manifold

Brand: WIKA Alexander Wiegand SE & Co. KG
Request Information
  • Basic features:
    • Blow-out proof valve spindle
    • Non-rotating, low-wear spindle tip
    • Metal-to-metal back seat design
  • Special design features:
    • For oxygen, oil- and grease-free
    • ASME B31.1, power piping (only available with graphite sealing packing)
  • Valve body:
    • Square design
    • Flat design
    • H-shaped design
    • T-shaped design
  • Standards used: Basic design
    • MSS SP-99, valves for measuring instruments
    • MSS SP-105, instrument valves for code applications
    • ASME B16.34, valves – flanged, threaded and welding end
    • ASME B1.20.1, pipe threads, general purpose (inch)
    • ASME B31.3, process piping
    • ASME BPVC, section VIII, division 1
  • Material requirements:
    • NACE MR0175 / ISO 15156, use in H₂S-containing environments in oil and gas production
  • Standard:
    • Threaded connection per ANSI B1.20.1, code NPT
    • Threaded connection per ISO 228-1, code G
    • Swivel connection
    • Weld-in connection
    • Compression fitting
    • Flange connection per IEC 61518, Form A or Form B 1)
    • Connection for EMICOgauge 2)
  • Size:
    • ¼ NPT, ⅜ NPT, ½ NPT, ¾ NPT
    • G ¼, G ⅜, G ½, G ¾

Features

  • Low-wear design due to non-rotating spindle tip in the bonnet
  • Low torque and smooth operation of valve handle even at high pressure
  • Enhanced safety due to blow-out proof bonnet design
  • Valve seat tested for leak tightness per ISO 5208 leak rate A
  • Customer-specific combination of valves and instruments (instrument hook-up) on request
    • Basic features:
      • Blow-out proof valve spindle
      • Non-rotating, low-wear spindle tip
      • Metal-to-metal back seat design
    • Special design features:
      • For oxygen, oil- and grease-free
      • ASME B31.1, power piping (only available with graphite sealing packing)
    • Valve body:
      • Square design
      • Flat design
      • H-shaped design
      • T-shaped design
    • Standards used: Basic design
      • MSS SP-99, valves for measuring instruments
      • MSS SP-105, instrument valves for code applications
      • ASME B16.34, valves – flanged, threaded and welding end
      • ASME B1.20.1, pipe threads, general purpose (inch)
      • ASME B31.3, process piping
      • ASME BPVC, section VIII, division 1
    • Material requirements:
      • NACE MR0175 / ISO 15156, use in H₂S-containing environments in oil and gas production
    • Standard:
      • Threaded connection per ANSI B1.20.1, code NPT
      • Threaded connection per ISO 228-1, code G
      • Swivel connection
      • Weld-in connection
      • Compression fitting
      • Flange connection per IEC 61518, Form A or Form B 1)
      • Connection for EMICOgauge 2)
    • Size:
      • ¼ NPT, ⅜ NPT, ½ NPT, ¾ NPT
      • G ¼, G ⅜, G ½, G ¾

    Features

    • Low-wear design due to non-rotating spindle tip in the bonnet
    • Low torque and smooth operation of valve handle even at high pressure
    • Enhanced safety due to blow-out proof bonnet design
    • Valve seat tested for leak tightness per ISO 5208 leak rate A
    • Customer-specific combination of valves and instruments (instrument hook-up) on request
    Close