The Rotork Fairchild Model 2000 Pneumatic Volume Booster converts a low flow signal to a high flow output.
It is ideally suited for a variety of applications including the operation of air systems that require rapid valve or cylinder action.
With its balanced supply valve and aspirator tube, the M2000 booster will maintain set point while delivering a strong boost of volume.
In addition, its no bleed soft seat design minimizes air consumption of the system.
As a pilot operated regulator design, the M2000 handles up to 250 psig [17.0 BAR], (1700 kPa) supply pressure.
The M2000 provides a flow capacity of 40 SCFM (68 m3/HR), which results in a Cv factor of just less than 1.0 in forward flow mode.Features
- Flow capacity of 40 SCFM (68 m3/HR)
- Balanced Supply Valve
- Aspirator Tube design
- Soft Supply and Exhaust Valve Seats
- Small signal volume
- A separate Control Chamber isolates the Diaphragm from the main flow
- Unit construction
Ambient Temperature Range
- -40° to 93° C (-40° to 200° F)
- 1/4” BSPT Female
- 3/8” BSPT Female
- Nitrile on Dacron
Enclosure, Body Material
Exhaust Capacity - Relieving Units Only
- 16 scfm (27.2 m³/hour)
- 40 scfm (68 m³/hour)
- 1/4” NPT Female
- 3/8” NPT Female
- < 1” WC (2.54 cm)
Signal or Output Pressure - Maximum
- bar: 10
- kPa: 1,000
- psig: 150
Supply Pressure - Maximum
- bar: 17
- kPa: 1,700
- psig: 250
Supply Pressure Effect
- psig: 0.1 (bar: 0.007, kPa: 0.7) for a psig: 100 (bar: 7, kPa: 700) Change in Supply Pressure