PI73-TS Pressure Intensifier

The P173-TS Intensifier amplifies the inlest pressure to a higher outlet pressure by a predetermined ratio.

Pressure in the high pressure line can become reduced as a result of a system leak or the use of the stored (pressure) energy. The PI73-TS restores and maintains that pressure in such instances.

Check and changeover valves are integrated within the main body intensifier as is the pilot-operated vent valve in the versions in which it is incorporated. When the inlet pressure x the ratio = the outlet pressure, then the P173- TS is in a stalled condition and there is minimal consumption of fluid.  The maximum outlet pressure is 1380 bar.

With the model incorporating the pilot-operated vent valve, that valve is normally held closed by the input pressure. lf the low pressure supply to the intensifier is lost, the integrated vent valve (if fitted) will open and decay the high pressure line to supply (versions are available to decay the pressure to exhaust).

Features

• Designed to boost the pressure of any water-based or mineral/synthetic oil-based fluid
• Boosts inlet pressure up to 7 times without external power. The maximum outlet pressure is:
  • psi: 20,020
  • kPa: 138,000
  • bar: 1,380
• When system pressure is achieved, there is minimal consumption of expensive hydraulic fluid
• External components manufactured from 316 (standard), or from duplex stainless steels; no painting required for hostile environments
• Two versions - with and without a pilot-operated vent valve for the high pressure line