Description
The Rotork Fairchild Model 11 is a Low Pressure Precision Pressure Regulator designed for applications that require high performance and accurate process control at very low pressures down to 3 inches water column.
The Fairchild Model 11 pneumatic low pressure regulator features control sensitivity of less than 0.05" water column and high flow capacity to deliver consistent and reliable precision accuracy to maintain your desired set point regardless of supply pressure changes or conditions.
The Fairchild Model 11 high precision pressure regulator will handle a 150 psi, 10 BAR maximum supply pressure and offers five (5) output pressure ranges from 0-0.5 psi, 0-0.034 BAR, 0-3.4 kPa up to 0-12 psi, 0-0.83 BAR, 0-83 kPa.
The Model 11 has a flow capacity of 27 SCFM, 40.7 m3/hr.
Features- Sensitivity of 0.05" WC for Precision Control in low pressure applications
- Relief Valve provides high exhaust flows
- Optional Low Bleed seat minimizes air consumption
- An Aspirator Tub compensates for downstream pressure droop under flow conditions
Configure
Specifications
Specifications
Output Options
- None
BSP Connection
- 1/2" BSPP Female
- 1/2" BSPT Female
- 1/4" BSPP Female
- 1/4" BSPT Female
- 3/8" BSPP Female
- 3/8" BSPT Female
Media
- Compressed Air
- Gas
Vent
- Straight
- Tapped Exhaust
Supply Pressure - Maximum
- bar: 10
- kPa: 1,000
- psig: 150
Sensitivity
- 0.05 inH₂O (0.127 cm)
Actuator Type
- Knob Adjust
- Screwdriver Adjust
- Tamper-Proof
Trim Material
- Brass
- Zinc-Plated Steel
Ambient Temperature Range
- -40° to 93° C (-40° to 200° F)
NPT Connection
- 1/2" NPT Female
- 1/4" NPT Female
- 3/8" NPT Female
Flow Capacity
- 24 scfm (40.7 m³/hour)
- 24 scfm (40.7 m³/hour) at psig: 100 (bar: 7, kPa: 700) Supply & psig: 1 (bar: 0.06, kPa: 0.68) Set Point
- 40.7 m³/hour
Supply Pressure Effect
- Less than 0.0007 bar
- Less than psi: 0.01 (bar: 0.0007, kPa: 0.07)
- Less than psig: 0.01 (bar: 0.0007, kPa: 0.07) for psig: 100 (bar: 7, kPa: 700) Change in Supply Pressure
- Less than psig: 0.01 (bar: 0.007, kPa: 0.07)
Mounting
- Bonnet Mounting
- Panel Mount
Enclosure, Body Material
- Aluminum
Elastomers
- Fluorocarbon (Viton)
- Nitrile
Pressure Range
- bar: 0 to 0.82
- bar: 0 to 1.36
- kPa: 0 to 137
- kPa: 0 to 82.7
- psig: 0 to 12
- psig: 0 to 20
Exhaust Capacity - Relieving Units Only
- 0.5 scfm
- 0.5 scfm (0.85 m³/hour) where Downstream Pressure is psig: 0.1 (bar: 0.007, kPa: 0.7) Above psig: 1.0 (bar: 0.06, kPa: 6.8) Set Point
- 0.85 m³/hour
Relief
- Low Bleed
- Non-Relieving
- Relieving