Images are representations only.

Model 4800A High Flow Pneumatic Volume Booster

Brand: Fairchild Industrial Products
Rotork Fairchild’s M4800A is a High Flow Pneumatic Volume Booster specifically designed for Valve and valve actuation systems.

With its Cv of 9 in both forward and exhaust modes, this pilot operated booster provides fast response and accurate control for valve actuation.

In addition, the M4800A has an integral bypass valve, for optimum tuning and adjustment, even while in operation, to obtain maximum performance on opening and closing times with minimal overshoot or oscillation. 

In its pilot operated regulator design, the M4800A handles up 250 psig, [17.0 BAR], (1,700 kPa) supply pressure and delivers an output pressure up to 150 psig [10.0 BAR] (1,000 kPa).

The Fairchild Model 4800A Booster provides a flow capacity of 500 SCFM (850 m3/HR), which equates to a Cv factor of approximately 9 in both forward and exhaust modes.
Features
  • Cv = 9; Flow capacity of 500 SCFM (850 m3/Hr)
  • Ratio Accuracy of 0.5%
  • Fixed deadband between the operation of the supply valve and exhaust valve
  • Integral bypass needle valve
  • Soft seat supply and exhaust valve
  • Pressure balanced supply valve
  • Damped diaphragm control chamber
  • Two accessory ports connected to the outlet chamber
  • Tapped exhaust port.
Rotork Fairchild’s M4800A is a High Flow Pneumatic Volume Booster specifically designed for Valve and valve actuation systems.

With its Cv of 9 in both forward and exhaust modes, this pilot operated booster provides fast response and accurate control for valve actuation.

In addition, the M4800A has an integral bypass valve, for optimum tuning and adjustment, even while in operation, to obtain maximum performance on opening and closing times with minimal overshoot or oscillation. 

In its pilot operated regulator design, the M4800A handles up 250 psig, [17.0 BAR], (1,700 kPa) supply pressure and delivers an output pressure up to 150 psig [10.0 BAR] (1,000 kPa).

The Fairchild Model 4800A Booster provides a flow capacity of 500 SCFM (850 m3/HR), which equates to a Cv factor of approximately 9 in both forward and exhaust modes.
Features
  • Cv = 9; Flow capacity of 500 SCFM (850 m3/Hr)
  • Ratio Accuracy of 0.5%
  • Fixed deadband between the operation of the supply valve and exhaust valve
  • Integral bypass needle valve
  • Soft seat supply and exhaust valve
  • Pressure balanced supply valve
  • Damped diaphragm control chamber
  • Two accessory ports connected to the outlet chamber
  • Tapped exhaust port.
Close

Specifications

Brand

Flow Rate

  • 5.0 Cv
  • 9.0 Cv

Mounting

  • Bracket

Enclosure, Body Material

  • Aluminum

Flow Capacity

  • 500 scfm (850 m³/hour) at psig: 100 (kPa: 700, bar: 7)

Ambient Temperature Range

  • -40° to 93.3° C (-40° to 200° F)

BSP Connection

  • 1" BSPP Female
  • 1" BSPT Female
  • 3/4" BSPP Female
  • 3/4" BSPT Female

Elastomers

  • Fluorocarbon
  • Nitrile

Signal or Output Pressure - Maximum

  • psig: 150 (kPa: 1,000, bar: 10)

Trim Material

  • Stainless Steel
  • Zinc-Plated Steel

Diaphragm Material

  • Nitrile on Dacron

Ratio

  • 1:1

Supply Pressure Effect

  • psi: 0.10 (kPa: 0.7, bar: 00.7) for psi: 100 (kPa: 700, bar: 7) Change in Supply Pressure

Environmental Protection

  • Acceptable for use in Zones 1 & 2 for Gas Atmosphere, Groups IIA & IIB & Zones 21 & 22 for Dust Atmospheres

NPT Connection

  • 1" NPT Female
  • 3/4" NPT Female

Ratio Accuracy

  • 0.5 % of psi: 100 (kPa: 700, bar: 7) Output Span

Exhaust Capacity - Relieving Units Only

  • 100 scfm (170 m³/hour)

Supply Pressure - Maximum

  • bar: 17
  • kPa: 1,700
  • psig: 250

Approvals & Certifications

  • CRN - Canadian Registration Number
Close