• Switch Position: Normally Open, Normally Closed
  • Pressure Range: 2" Water Column to 120 psig , 0.006-8 bar, 0.63-800 kPa 
  • Supply Pressure (Maximum): 120 psig, 8 bar, 800 kPa
  • Ambient Temperature: -40° to 93.3°C (-40° to 200°F)
  • Port Size: 1/4", 3/8", 1/2"
  • Port Thread: NPT, BSPT (Tapered)
  • Actuator Adjustment:
    • Bias Adjustment
    • Knob Adjustment
    • Tamper Proof
  • Options:
    • Tapped Exhaust
    • Fluorocarbon (Viton) Elastomers
    • Separate Supply to Pilot
  • Materials of Construction:
    • Body & Housing: Aluminum Casting
    • Trim: Stainless Steel, Zinc Plated Steel
    • Elastomers: Buna N & Dacron
The above description encapsulates the entire product series. Specifications for individual configurations may vary depending on the selection chosen.
read more...

Selected Configuration

Model #:

244233E

Price:
$609.00 USD
Availability:
Ships 8 - 12 Days
Min. Qty:
1 Item

Configuration

reset configuration

Pressure Range

Pressure Range below describes the range of the entire series.
  • bar: 0.03 to 4
  • kPa: 0.63 to 800
  • psig: 0.5 to 120

Flow Capacity

  • 14 SCFM (23.8 m³/Hour)
  • 14 SCFM (23.8 m³/Hour) at psig: 100 (bar: 7, kPa: 700) Supply
  • 23.8m³/Hour (30)

Supply Pressure - Maximum

  • bar: 8
  • kPa: 800
  • psig: 120

Supply Pressure Effect

  • psig: 10 (bar: 0.7, kPa: 70) use separate supply option if inlet is less than psig: 10 (bar: 0.7, kPa: 70)

Signal or Output Pressure - Maximum

  • bar: 8
  • kPa: 800
  • psig: 120

Ambient Temperature

  • -40° to 93° C (-40° to 200° F)

Sensitivity

  • 0.2 Inch WC to 0.5 psig (Depending on Model)

Air Consumption

  • Maximum: Less than 0.015 SCFM (0.03 m³/hr) for psig: 100, (bar: 7, kPa: 700) inlet

Exhaust Capacity - Relieving Units Only

  • 14 SCFM
  • 14 SCFM (23.8 m³/Hour) at psig: 100 (bar: 7, kPa: 700) drop
  • 23.8m³/Hour

Process Connection - Threaded

  • 1/4" Female NPT
  • 3/8" Female NPT
  • 1/2" Female NPT
  • 1/4" Female BSPT
  • 3/8" Female BSPT
  • 1/2" Female BSPT

Relief

  • Relieving

Vent

Available vent/exhaust port types listed below, straight is standard.
  • Straight
  • Tapped Exhaust

Actuator Type

Available acutator adjustment types listed below, bias adjustment is standard.
  • Knob Adjust
  • Tamper-Proof

Mounting

  • Panel Mount
  • Pipe

Enclosure/Body Material

  • Aluminum

Trim Material

  • Stainless Steel
  • Zinc-Plated Steel

Elastomers

Available elastomers listed below, buna-n on dacron is standard.
  • Buna-N on Dacron
  • FluoroCarbon (Viton)
213.53 Copper Alloy Bourdon Pressure Gauge

213.53 Copper Alloy Bourdon Pressure Gauge

WIKA Bourdon Pressure Gauge, 213.53 Series

233.53 Stainless Steel Bourdon Pressure Gauge

233.53 Stainless Steel Bourdon Pressure Gauge

WIKA Bourdon Pressure Gauge, 233.53 Series

T213.53 Copper Alloy Bourdon Pressure Gauge

T213.53 Copper Alloy Bourdon Pressure Gauge

Telematic Bourdon Pressure Gauge, T213.53 Series

T233.53 Stainless Steel Bourdon Pressure Gauge

T233.53 Stainless Steel Bourdon Pressure Gauge

Telematic Bourdon Pressure Gauge, T233.53 Series