Images are representations only.

Model P31 Ultra Low Noise Power Unit/Amplifier

Brand: Wilcoxon Sensing Technologies
Features:
  • Powers model 731 seismic accelerometer
  • Ultra low noise
  • Amplifies signal x1, x10, x100
  • Switchable output: acceleration or velocity
  • Battery powered
  • Wide dynamic range
  • Switchable low pass filter, 450 Hz or 100 Hz
  • Low current draw
  • Battery test light
show more
Features:
  • Powers model 731 seismic accelerometer
  • Ultra low noise
  • Amplifies signal x1, x10, x100
  • Switchable output: acceleration or velocity
  • Battery powered
  • Wide dynamic range
  • Switchable low pass filter, 450 Hz or 100 Hz
  • Low current draw
  • Battery test light

Specifications

Accuracy

  • Gain Accuracy: ± 0.25 dB

Battery Life

  • > 50 Hours

Electrical Connectors

  • Signal Input: Amphenol Plug 31-225 Twinax
  • Signal Output: BNC Connector

Frequency

  • Frequency Response, -3 dB (Velocity): 0.8 to 150 Hz
  • Frequency Response, -3 dB [Acceleration (100 Hz Filtered)]: 0.05 to 100 Hz
  • Frequency Response, -3 dB [Acceleration (450 Hz Filtered)]: 0.05 to 450 Hz

Humidity

  • 90 % Relative Humidity, Max.

Input

  • Current to Transducer, ± 20 %: 2.4 mA
  • Voltage to Transducer: 18 Vdc

Load Impedance

  • Recommended Load Impedance: > 250 kiloohms

Noise

  • Spectral Noise, 1 to 10 Hz, Referred to Input: < -140 dB

Non-Linearity

  • Amplitude Non-Linearity: < 1 %

Output Impedence

  • Output Impedance, Nominal: 2.5 kiloohms

Power Requirement

  • Internal Batteries: (2) 9 V Alkaline Batteries

Sensitivity

  • Output Sensitivity (Acceleration): 10 to 1,000 V/g
  • Output Sensitivity (Velocity): 0.1 to 10 V/inch/sec

Temperature Range

  • 0° to 55° C (32° to 130° F)